Cond Sensor InPro7108-VP-PEEK
4-Electrode Conductivity Sensor.The InPro 7108-VP-PEEK utilizes 4-electrode technology to expand its measurement range in medium to high conductivity solutions.
Wide Measuring Range
WideRange technology makes the sensor suitable for many applications; rinsing, control of dilution processes, and monitoring of salt content.
Withstands Sterilization Cycles
The InPro 7108 conductivity sensor can withstand the most rigorous CIP/SIP procedures in the food and pharmaceutical industries.
Withstands Aggressive Solutions
This conductivity sensor has been especially designed and ruggedly built to withstand even the most aggressive chemical solutions.
Material No.: 52002002
| Temperature Sensor | PT 1000 |
| Cell Constant | 0.25 cm-1 |
| Cable Connection | Vario Pin (IP 68) |
| Cell Constant (nominal) | 0.25 cm–1 |
| Measurement Technology | Conductive |
| Process Connection | 1 inch NPT |
| Sterilizable | Yes |
| Operating Temperature (Fahrenheit) | 14...284 °F |
| Operating Temperature (Celsius) | -10...140 °C |
| Mechanical Pressure Resistance (PSI) | 250 psi (77 °F), 100 psi (203 °F) |
| Model Family | 4-electrode sensor |
| Hazardous Area Approvals | Yes |
| Measured Pressure Resistance | 0 – 100 psig @ 203 °F 0 – 246 psig @ 77 °F (0 – 7 barg @ 95 °C 0 – 17 barg @ 25 °C) |
| Electrode Material | Sterilizable, 316 L or HA-C22 |
| Primary Media/Application | Other Water Processes Chemical Processes Other Industrial Processes Wastewater |
| Hygienic/Biocompatibility Approvals | No |
| Mechanical Pressure Resistance (Bar) | 17 bar (25 °C), 7 bar (95 °C) |
| Sensor Material | PEEK (FDA) |
| System accuracy | ± 5 % or better |
| Measurement Range | 0.02-650 mS/cm |
Compact Sensor Design
The conductivity sensor has a very compact design, which allows installation even in small pipes. At the same time, the sensor design also meets the highest hygienic requirements.
Process Reliability and Easy Connection
The IP68 rated VarioPin connector system ensures excellent signal transmission and avoids problems associated with humidity.
Low Maintenance Due to Flat Surface
The smooth flat surface design prevents any significant fouling. This increases the reliability of the sensor, and only low maintenance is required.
