Automated Density Measurement

Guarantee contamination-free measurements:

Blow air through the measuring cell to dry it completely and ensure that there is no condensation left.

Ensure consistent sampling with the SPR200 sampling pump, optimizing your sampling speed for different samples and rinsing solutions.

Want to switch from sampling to rinsing solutions, or separate your waste? The 3-way valve adds flexibility to your workflow.

The perfect solution for the beverage industry. Run multiple samples with low viscosities using a customized workflow:

• Multiple samples (15 to 303)
• Large choice of beaker sizes (25 to 250 mL)
• Rinsing with next sample
• Additional pH measurement possible in the same beaker
• Sedimentation of sample prevented by homogenizing with a stirrer
• Degassing of carbonated beverages with a combination of air flow and stirrer
• Final rinsing and testing with water

Tired of using a syringe? Run fully automated density measurements for any type of sample, saving time and improving the repeatability of your results. Automatic rinsing and drying ensures contamination free operations.  .

• Single samples, even viscous ones (max. 36,000 mPas)
• Automatic sampling (pressurized air)
• Automatic rinsing with 2 solutions
• Automatic drying with desiccator
• Small sample volume (6, 9 or 20 mL)
• Sample recovery in cases where the sample must be retained as a reference sample

Do you need to analyze your sample at a higher temperature? Is it too viscous or even solid at room temperature? The SC1H is the heated version of the SC1 and keeps the sample and tubing at temperatures up to 80°C. 

Run a series of samples, automatically.

• Up to 30 samples, even highly viscous ones (max. 36,000 mPas)
• Automatic sampling (pressurized air)
• Automatic rinsing with 2 solutions
• Automatic drying with desiccator
• Small sample volume (6, 9 or 20 mL)
• Sample recovery in cases where the sample must be retained as a reference sample

Run a series of samples at higher temperatures, automatically. The SC30H is the heated version of the SC30 and keeps the samples and tubing at temperatures up to 80°C.