Transmitter M100 SM RS-485

For Analog or Digital Biocontrollers The M100 Sensor Mount (SM) is a single-channel transmitter for connecting ISM optical dissolved oxygen sensors to a biocontroller. The Bluetooth 4.0 interface is compatible with the PC-based and mobile versions of iSense software.

Straight-forward Connectivity

The M100 SM offers multiple independent interfaces: two configurable 4/20 mA analog outputs and one digital MODBUS RTU.

Clear Sensor Status Alerts

LEDs clearly indicate sensor status, alarms and warnings to ensure your sensor is working properly.

Easy Sensor Handling

ISM’s Plug and Measure feature minimizes the risk of installation trouble and simplifies sensor handling.

Call for Quote

Overview
Documentation
Accessories
More Information
More Information

Specifications - Transmitter M100 SM RS-485

Model Family	M100 SM
Measurement Parameters	Optical DO
Channels	1
Sensor Type	ISM
Size	Sensor Mount
Power supply	24 VDC
Current Outputs	2 x 0/4-20mA
Relays	None
Digital input	None
Analog input	None
PID Controller	None
User Interface	None
USB Interface	No
Ingress protection	IP67
Communication	Bluetooth; MODBUS RTU
Wiring Mode	4-Wire
Hazardous area approval	No
Hygienic/Biocompatibility Approvals	No
Other certificates	CE compliant
Primary Media/Application	Pharmaceutical/Life Science Production; Other Industrial Processes
Material Number(s)	30365367

Simplified installation
The M100 SM is an easy to install, sensor mount transmitter for the analog or digital integration of ISM optical dissolved oxygen sensors into a biocontroller‘s programmable logic controller.

Predictive maintenance
iSense Mobile and Bluetooth communication provide access at any time to ISM‘s predictive maintenance diagnostics. Diagnostics and other sensor data can be sent as an email from a mobile device.

Error-free operation
Transmitter current outputs are configurable via PC or mobile device. Reconfiguring is not necessary after a sensor exchange, eliminating configuration errors.

Electronic data management
Configuration and calibration data are stored on the sensor. Wireless communication allows this information to be sent to iSense where it can be used for sensor management and compliance purposes.

Documentation

Datasheets & Brochures

Datasheets for Sensor Mount Transmitter M100 SM

The M100 Sensor Mount (SM) is a single-channel transmitter. It allows the connection on biocontrollers of 1-wire ISM sensors for measuring pH, ampDO a...

Family Flyer Transmitter M100/M200/M300/M400/M700/M800 Series

Instruction Manuals

Instruction Manuals for Sensor Mount Transmitter M100 SM

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits ar...

Application Solutions for M100 Modbus Programmers Guide

This programmers guides explains general modbus informations, implemented modbus registers in M100, detailed description of the implemented Modbus re...

Bus Communication Info

M100 2XH DTM Setup V1.00.0003

HART, DTM for PACTware ™: Version 4.x

Accessories

Get Your Quote

Transmitter M100 SM RS-485

Search suggestions

Transmitter M100 SM RS-485

For Analog or Digital Biocontrollers The M100 Sensor Mount (SM) is a single-channel transmitter for connecting ISM optical dissolved oxygen sensors to a biocontroller. The Bluetooth 4.0 interface is compatible with the PC-based and mobile versions of iSense software.

Documentation

Datasheets & Brochures

Instruction Manuals

Bus Communication Info

Accessories

Request Quote or InfoGet a QuoteInstant QuoteSolution InformationRequest a Demo